Install the front handle onto the top side of the drive shaft housing and move it to a comfortable position. Page 12 See Figure 8. The guard is shipped installed on these brushcutter models. Instructions have been included for reference when changing from string trimmer operation back to brushcutter operation.
With the string head removed, place the brushcutter guard on the gear head as shown. Page 13 2. Adjust the strap to a comfortable position.
Page Operation To avoid burns from hot surfaces, never operate unit with the bottom of the engine above waist level. Hold the trimmer with the right hand on the rear handle and the left hand on the front handle. Keep a firm grip with both hands while in operation.
The straight shaft trimmer cuts when passing the unit from left to right. Brushcutter should be held at a comfortable position with the rear handle about hip height. Page Maintenance Failure to do so can cause poor performance, possible injury and may void your warranty.
You can often make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorized service dealer. Use only monofilament string. Use original manufacturer's replacement string for best performance. String Diameter: CS30 -. Stop the engine, disconnect the spark plug wire. Hold the string head and unscrew the spool retainer. If you notice a power loss with your gas powered tool, you may need to remove these deposits to restore performance.
Drain all fuel from tank into a container approved for gasoline. Failure to follow all safety instructions listed below, can result in serious personal injury. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the cutting line or blade.
Do not wear loose fitting clothing, short pants, or go barefoot. Do not wear jewelry of any kind. This product is equipped with a spark arrestor; however, otheruserrequirementsmayapply.
Checkwithyourfederal, state, or local authorities. Do not overreach. Overreaching can result in loss of balance or exposure to hot surfaces. Replace any damaged parts before use. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought to contribute to the development of these symptoms. It is presently unknown what, if any, vibrations or extent of exposure may contribute to the condition. There are measures that can be taken by the operator to possibly reduce the effects of vibration:.
When operating the unit wear gloves to keep the hands and wrists warm. Limittheamountofexposure per day. If you experience any of the symptoms of this condition, immediatelydiscontinueuseandseeyourphysicianabout these symptoms. Wipe up any fuel spillage. Move 9 m 30 ft. Be sure the string head or blade is properly installed andsecurelyfastened.
Failuretodosocancause serious injury. Do not use any other cutting attachment. To install any other brand of cutting head to this string trimmer can result in serious personal injury. Keep string head below waist level.
Never cut with the string head located over 76 cm 30 in. Maintain proper control until the blade has completely stopped rotating. Always make sure blade is installed correctly and securely fastened before each use.
Failure to do so can cause serious injury. Do not use any other blade. To install any other brand blade or cutting head to this brushcutter can result in serious personal injury. WnnrulruG: To reduce the risk of injury, the user must read and understand the operator,s manual before. Previous Page. Next Page. Trimmer Ryobi RY Operator's Manual 30cc fuel injected string trimmers and brushcutters 26 pages.
WnnrulruG: To reduce the risk of injury, the user must read and understand the operator,s manual before using this product. Page 2 r Do not touch area around the muffler or cylinder of the A wmuruc, unit, these parts get hot from operation. General Safety Rules " ' Read and understand all instructions.
Failure to follow all r Always stop the engine and remove the spark plug wire Specific SafetY Rules " Page 3 I Replace any blade that has been damaged. Please study them and learn their meaning for safe sure blade is installed conectly and securely fastened operation of this product.
Call Ryobi customer service for assistance. See Figure 2. I Remove 2 wing nuts, 2 bolts, and clamp from the front handle.
0コメント